Everyone knows the importance of the brake system for a vehicle, even for ordinary vehicles, especially for fully automatic concrete mixers. How should we maintain and solve the brake failure of mixer parts?
There are many reasons for brake failure. Xiao Bian simply classifies it as follows:
The brake failure of the mixer caused by insufficient maintenance usually lacks maintenance for the brake system. When it is critical to use it, it is likely to strike, causing a disaster.
Treatment method: frequently check whether the brake master cylinder, brake wheel cylinder, air reservoir and pipeline are in good condition. In case of air leakage and poor working condition, repair or replace them immediately, and pay attention to the change of air pressure on the instrument during normal driving.
Unreasonable operation method leads to failure of parts
Due to the driver's lack of driving experience, the wrong operation of the mixer led to the failure of parts.
Solution: When going down a long slope, shift to a low gear to reduce the speed, use the engine to restrain the speed, use the brake as little as possible to prevent the brake pads from overheating, and use the brake tap instead of the "one foot stuffy" method when stepping on the brake.
Severe overload, resulting in brake failure
Serious overloading increases the total mass of the mixer truck. Under the effect of gravity acceleration, the inertia of vehicle motion is increased, which directly leads to brake failure.
Solution: Overloaded vehicles increase the total mass of the vehicle, thus increasing the inertia of the vehicle. When driving overloaded vehicles, you must be slow. Don't rush for time and disregard your life safety.
Reasonable selection of auxiliary braking makes driving safer
Exhaust brake has become the standard on most trucks, and should be used together during driving. In addition, we can also choose other auxiliary braking (such as engine braking, retarder, etc.) to make our driving safer.
We will introduce the specific content above, and hope it will be helpful to the mixer drivers with such problems. Follow us http://www.zkzdsljbc.com , learn more!