您好,欢迎光临莱州聚峰机械有限公司官方网站!

服务热线

400-879-1999

你所在位置: 首页 >> 新闻资讯 > 公司新闻 >
公司新闻

中科搅拌车的使用优势!

来源:http://www.zkzdsljbc.com/ 时间:2022-02-17

1、大容量设计,独特的扩容技术,装载量更大,相比同类产品装载量提升百分之10。
1. With large capacity design and unique capacity expansion technology, the loading capacity is larger, which is increased by 10% compared with similar products.
2、强度耐磨钢,搅拌筒筒体材质和叶片材质均采用520MPa强度耐磨钢,搅拌筒使用寿命达到5-8年。
2. Strength wear-resistant steel, 520mpa strength wear-resistant steel is adopted for the material of mixing cylinder and blade, and the service life of mixing cylinder can reach 5-8 years.
3、全进口液压三大件,搅拌筒整体使用高 强耐磨钢,特别加强易损零部件,大幅提升搅拌车的使用寿命。
3. All three imported hydraulic parts. The mixing drum uses high-strength wear-resistant steel as a whole, and vulnerable parts are specially strengthened to greatly improve the service life of the mixing truck.
4、国内的搅拌技术:匀质性更好:国内更先进的双对数螺旋曲线设计,佳的导流孔和搅拌板配比,使搅拌筒转动更平稳,混凝土匀质性更好,杜绝离析;
4. Domestic mixing technology: better uniformity: domestic more advanced double logarithmic spiral curve design and better ratio of diversion hole and mixing plate make the mixing drum rotate more stably, the concrete uniformity better and eliminate segregation;
全自动混凝土搅拌车
5、进出料速度更快:独特的大螺距设计,进出料速度相比同类产品提升百分之25,进料速度每分钟≥4m3,出料速度每分钟≥3m3。
5. Faster feeding and discharging speed: with the unique large pitch design, the feeding and discharging speed is 25% higher than that of similar products. The feeding speed is ≥ 4m3 per minute and the discharging speed is ≥ 3m3 per minute.
6、残余率更低:后锥采用边螺距螺旋线,叶片采用行业的内凹三段式设计,残余率≤百分之0.8。
6. Lower residual rate: the rear cone adopts side pitch helix, and the blade adopts the concave three-stage design of the industry, with the residual rate ≤ 0.8%.
7、整车设计全三维仿真,搅拌筒与进出料系统采用高 强耐磨钢板,通过有限元仿真分析,优化副车架结构,上装整体减重百分之12,更加节能。
7. The whole vehicle is designed with full three-dimensional simulation. The mixing drum and feeding and discharging system adopt high-strength wear-resistant steel plate. Through finite element simulation analysis, the sub frame structure is optimized, and the overall weight of the upper assembly is reduced by 12%, which is more energy-saving.
8、轿车化的坐乘感受,人性化的操作系统。
8. Car based ride experience and humanized operating system.
上一篇:全自动混凝土搅拌车皮带输送机怎么进行维护?
下一篇:混凝土搅拌车突发故障残渣应该怎么办?
tag:混凝土搅拌车,小型混凝土搅拌车,全自动混凝土搅拌车
当前位置: 首页 - 新闻资讯 > 公司新闻 >

中科搅拌车的使用优势!

作者:中科聚峰混凝土搅拌车厂家 时间:2022-02-17

1、大容量设计,独特的扩容技术,装载量更大,相比同类产品装载量提升百分之10。
1. With large capacity design and unique capacity expansion technology, the loading capacity is larger, which is increased by 10% compared with similar products.
2、强度耐磨钢,搅拌筒筒体材质和叶片材质均采用520MPa强度耐磨钢,搅拌筒使用寿命达到5-8年。
2. Strength wear-resistant steel, 520mpa strength wear-resistant steel is adopted for the material of mixing cylinder and blade, and the service life of mixing cylinder can reach 5-8 years.
3、全进口液压三大件,搅拌筒整体使用高 强耐磨钢,特别加强易损零部件,大幅提升搅拌车的使用寿命。
3. All three imported hydraulic parts. The mixing drum uses high-strength wear-resistant steel as a whole, and vulnerable parts are specially strengthened to greatly improve the service life of the mixing truck.
4、国内的搅拌技术:匀质性更好:国内更先进的双对数螺旋曲线设计,佳的导流孔和搅拌板配比,使搅拌筒转动更平稳,混凝土匀质性更好,杜绝离析;
4. Domestic mixing technology: better uniformity: domestic more advanced double logarithmic spiral curve design and better ratio of diversion hole and mixing plate make the mixing drum rotate more stably, the concrete uniformity better and eliminate segregation;
全自动混凝土搅拌车
5、进出料速度更快:独特的大螺距设计,进出料速度相比同类产品提升百分之25,进料速度每分钟≥4m3,出料速度每分钟≥3m3。
5. Faster feeding and discharging speed: with the unique large pitch design, the feeding and discharging speed is 25% higher than that of similar products. The feeding speed is ≥ 4m3 per minute and the discharging speed is ≥ 3m3 per minute.
6、残余率更低:后锥采用边螺距螺旋线,叶片采用行业的内凹三段式设计,残余率≤百分之0.8。
6. Lower residual rate: the rear cone adopts side pitch helix, and the blade adopts the concave three-stage design of the industry, with the residual rate ≤ 0.8%.
7、整车设计全三维仿真,搅拌筒与进出料系统采用高 强耐磨钢板,通过有限元仿真分析,优化副车架结构,上装整体减重百分之12,更加节能。
7. The whole vehicle is designed with full three-dimensional simulation. The mixing drum and feeding and discharging system adopt high-strength wear-resistant steel plate. Through finite element simulation analysis, the sub frame structure is optimized, and the overall weight of the upper assembly is reduced by 12%, which is more energy-saving.
8、轿车化的坐乘感受,人性化的操作系统。
8. Car based ride experience and humanized operating system.

截屏,微信识别二维码