First, prepare the emergency drive hose, shut down the machine, and then disconnect the high-pressure fuel pipe connector of the hydraulic motor.
Extinguish the flame, remove the high-pressure fuel pipe from the hydraulic motor and connect it to the corresponding connector on the failed vehicle using the emergency drive hose.
When the vehicle is started and the steering wheel is moved to the emission position, the unwanted air-fuel mixture in the vehicle will be discharged.
After the completion of the emergency drive, remove and replace the drive hose from the automatic concrete mixer.
Place a wooden wedge between the trailer and the truck to control the rotation of the mixing tank, stop the engine and remove the high-pressure fuel pipe of the hydraulic motor. The mixing barrel can rotate freely, and the rotating barrel can be controlled. Therefore, the maintenance hole shall be opened with the maintenance hole facing down and the concrete of the automatic concrete mixer shall be cleaned. After unloading the concrete, the automatic concrete mixer can return to its original state.
This article is dedicated by the concrete mixer truck. For more information, please click: http://www.zkzdsljbc.com Sincere attitude. To provide you with a comprehensive service. More relevant knowledge, we will continue to offer to you. Please look forward to it