The use of multi-functional concrete transport mixer will inevitably lead to the phenomenon that the tank doesn't rotate, so what's the reason? What parts do we need to check? The following is a detailed introduction of Zhongke Jufeng company.
1. Engine failure (not impossible, rumbling sound);2. 检查液压油是否泄漏(用破管更换油管，用破密封更换油封);3、检查多功能搅拌混凝土运输汽车散热器风扇反过来,怀特液压油乳化:不,液压油温度超过90度,液压系统,没有压力,罐不转(这种情况不要着急,冷却水液压泵,液压马达,液压油温度、jar可以旋转。取出材料，固定散热器或更换液压油);4. 传动轴损坏损坏10个字节(a损坏应立即更换传动轴;B传动轴ok);5. 在运输过程中，我没有注意。jar停了!混凝土掉进去了，罐子翻不了。
2. Check whether the hydraulic oil leaks (replace the oil pipe with a broken pipe and replace the oil seal with a broken seal); 3. Check the radiator fan of the multi-functional mixing concrete transport vehicle, in turn, white hydraulic oil emulsification: No, the hydraulic oil temperature exceeds 90 degrees, the hydraulic system, there is no pressure, and the tank does not rotate (in this case, do not worry, the cooling water hydraulic pump, hydraulic motor, hydraulic oil temperature, jar can rotate). Take out the material, fix the radiator or replace the hydraulic oil); 4. The transmission shaft is damaged and damaged by 10 bytes (if a is damaged, replace the transmission shaft immediately; B is OK); 5. I didn't pay attention to it during the transportation. Jar stopped! The concrete fell in and the jar couldn't be turned over.
6. The hydraulic pump is damaged (the situation is complex, diarrhea is serious, and other damages); the above six situations occur, but the concrete is not coagulated, and the hydraulic motor and reducer are free of faults. The emergency device can be used. The hydraulic pump of another multi-functional concrete transportation mixer can drive the hydraulic motor to rotate, and the concrete can be put out for maintenance!
以上是中科聚峰混凝土运输搅拌车厂家为大家介绍的相关内容，想要了解更多内容，欢迎访问网站：The above is the relevant content introduced by the manufacturer of Zhongke Jufeng concrete transport mixer for you. To learn more, please visit the website: