As a means of transportation, the automatic feeding mixer must comply with the maintenance and repair regulations of the Ministry of transportation. We will carry out maintenance and repair according to the actual situation of automatic feeding mixer. For regular maintenance, in addition to regular maintenance of vehicle engine, chassis and other parts of automatic feeding mixer, the following maintenance work must also be performed.
1. Reasonably determine the protection period: the protection period of the car is the distance, mileage or protection time of the car.
In the process of practical application, the vehicle owner should refer to the protection cycle recommended by the automobile manufacturer, contact the technology and service conditions of the vehicle, and adjust the protection cycle appropriately. Generally speaking, new cars can be used under good road conditions without frequent protection, and can be used within the protection period specified by the manufacturer. However, if the vehicle technology is insufficient or the application conditions are not good, the protection period must be appropriately shortened.
2. Make full use of free inspection: free inspection activities initiated by concrete mixer truck manufacturers are usually beneficial to owners. Car owners can use these inspection activities to carry out specific physical examination on their favorite cars, so as to discover, eliminate and save potential problems in real time. There will be high maintenance and protection costs in the future.
3. Minimize maintenance component failures. Many owners of concrete mixers have this feeling. After the crash and repair, the specific components that the car likes will lose control, leading to the early maintenance period of the vehicle. The reason for this scenario is mainly related to the assembly technology of the repairman and the quality of the parts. Therefore, please prevent the failure of the maintenance assembly, apply various advanced technology protection equipment and techniques to protect your car from disassembly, and prevent unnecessary damage to the assembly and parts of the car, so as to improve the quality of protection and maintenance. It's better to reduce the total cost.
In addition to the above knowledge, after transporting the concrete in the concrete kneading test, the inside of the mixing drum is usually cleaned with water to prevent the hardened concrete from occupying the space and reduce the volume of the mixing drum. The reasonable operation and maintenance of the equipment will effectively hinder the good performance of the equipment under construction.
Automatic feeding mixer after-sales maintenance is in place, welcome to purchase!