The engine of the concrete mixer is overheated, which is generally what the driver friends call high temperature. It is bad for the engine to run at high temperature. Bad luck may cause the engine to break down. What should we do if this happens? How to solve it? The following emergency measures are expected to help you.
1. If the engine overheats on ordinary roads, reduce the speed as soon as possible, drive the mixer truck to the shade of trees or to a relatively cool place, and stop the concrete mixer truck. Open the engine cover, let the engine run at idle speed, and wait for the engine temperature to gradually return to normal.
After the engine water temperature returns to normal, stop the engine. Then wait for a period of time until the water temperature of the engine drops sufficiently, and then check the cooling water volume of the engine. At this time, the cooling water of the engine is mostly insufficient. After replenishing the cooling water according to the specified amount, check the cooling system again. After confirming that there are no other faults, start the engine and continue driving.
2. If the engine overheats on the highway, you need to turn on all the warm air and open the window immediately. Because there is warm air to help the cooling water dissipate heat, the cooling water temperature can drop significantly.
In this way, you can continue driving, find the exit of the highway nearby, and drive the mixer truck to a certain place to stop.
Next, just lower the temperature of the engine according to the above method. Pay attention not to park the concrete mixer at the roadside, so as not to affect the traffic or be hit. Come to our website for more relevant content http://www.zkzdsljbc.com Ask about it!