1. Refuel in time
When operating the automatic feeding mixer, the driver should pay attention to the amount of fuel at any time. When the fuel gauge shows that the fuel quantity is close to "0", please refuel in time. Do not add fuel until the fuel is completely used up. Not only will the diesel engine stop running without fuel, but also air will enter the fuel system. Once the air enters the fuel system, the fuel is not only wasted, but also more difficult to discharge.
2. Be careful not to block the fuel system
The automatic feeding mixer has a special working environment, which can easily block the fuel system. If the fuel system is blocked, the normal operation of the equipment will be affected. Therefore, be sure to check the time to ensure the smooth flow of the fuel pipe.
3. Carefully check the robustness of the fuel system
If the exhaust pipe of the automatic feeding mixer emits black smoke or the engine is difficult to start when it is running, it may be caused by air leakage. Please check the sealing performance of the fuel system.
4. Keep the fuel clean
About 50% of fuel system failures are caused by dirty fuel. For gasoline engines, most of the water is contained in the fuel, so the water in the gasoline will corrode and destroy the components of the fuel supply system.
5. Fuel selection is important
Select excellent fuel suitable for automatic feeding mixer. Inferior fuel filtration, impurities, sludge, moisture, long-term accumulation, sedimentation, oil pump filter, oil pipe and fuel injector, easy to block.
If we want to use the automatic feeding mixer for a long time, we need to strengthen the maintenance of its refueling system, clean up the waste fuel oil in time, and update the oil. In addition, its fuel tank should also be cleaned all the time. Keep clean and hygienic.
Today is the related knowledge of automatic concrete mixer compiled by Xiaobian. For more wonderful content, please click our website: http://www.zkzdsljbc.com Welcome to leave a message on the website, or call to communicate