1. The automatic feeding mixer truck will clean the fuel system regularly and control the generation of carbon deposition to keep the engine running.
2. Oil of appropriate quality grade shall be used for automatic feeding mixer truck. For the engine, the sd-sf grade oil should be selected according to the additional equipment and operating conditions of the intake and exhaust system. Cb-cd diesel engine oil should be used according to the mechanical load. The selection of specifications shall not be less than the manufacturer's specifications.
3. The oil and filter element will be changed regularly for the automatic feeding mixer truck. The quality of the oil changes during operation at any quality level. In order to prevent problems, the oil should be changed regularly according to the service conditions, and the amount of oil should be moderate (usually the upper limit of oil dirt).
4. The fully equipped automatic feeding mixing tank truck adheres to good ventilation of crankcase.
5. Maintain three kinds of filters of automatic feeding mixer truck.
6. The automatic feeding mixer truck will clean the crankcase regularly.
During engine operation, high pressure unburned gases, acids, moisture, sulfur and nitrogen oxides in the incineration chamber enter the crankcase through the gap between the piston ring and cylinder wall and mix with the metal powder produced by combustion. Therefore, the crankcase should be cleaned regularly to keep the engine interior clean.
This article is published by the concrete mixer truck. Do you have any understanding of these contents? For more information, please click: http://www.zkzdsljbc.com We'll have a lot more to see.